Question:
HOW TO: Launch CloudOne from CLI
Solution:
As of version 2.18.808, CloudOne Toolkit is now capable of launching several tasks from the CLI (Command Line Interface).
The syntax below with examples:
[Path_to_CloudOneToolkit:\] CloudOneToolkit.exe /un:[loginID] /pw:[loginPassword] /refid:[default | custom value] /task:[taskvalue]
Example:
C:\uxc1tk2>CloudOneToolKit.exe /un:james@uxd.com /pw:5-M99c8j@ND! /refid:default /task:mwscomplete
/un:[loginID]
Example: /un:james@uxd.com
/pw:[loginPassword]
Example: /pw:5-M99c8j@ND!
/refid:[default | custom value]
Example#1: /refid:default
Will autodetect the serial# and use as the refid value
Example#2: /refid:any_alphaNumeric_value_here
Will use any_alphaNumeric_value_here as the refid value
/task:[taskvalue]
- /task:main
Display the Technician Console, bypassing all startup prompts.
- /task:mpa
Bypass all startup prompts and Start the Multi-Point Assessment.
- /task:asb
Bypass all startup prompts and Start the Automated Service Bot
- /task:hwdquick
Bypass all startup prompts and Start the Hardware Diagnostic Tool with Quick Test Script.
- /task:hstquick
Bypass all startup prompts and Start the WinStress Test Tool with Quick Test Script.
- /task:mwscomplete
Bypass all startup prompts and Start the UAV Malware Scanner Tool
- /task:pco
Bypass all startup prompts and Start the PC Optimization Tool
- /task:da
Bypass all startup prompts and Start the Multi-Point Assessment.
- /task:dt
Bypass all startup prompts and Start the Data Transfer Tool
- /task:sec
Bypass all startup prompts and Start the System Event Calendar Tool
