Browse all support articles inside Getting Started / Onboarding.
Question: HOW TO: Install & configure QuickCAST Server? Solution: This section describes how to install QuickCAST. Before installation, be sure to shut down all programs that are running. Minimum System Requirements...
Congratulations on your QuickCAST Server Starter Kit purchase! A wise choice :) This article will introduce the contents of your new QuickCAST Server Starter kit. PACKAGE CONTENTS Note: The actual package may vary...
QUICKCAST SERVER APPLIANCE SETUP INSTRUCTIONS 1. Insert Power adapter into outlet and then connect to the QuickCAST Server MiniPC AC Port 2. Locate the QuickCAST Server license USB. Connect the USB to the QuickCAST...
QuickCAST deploys 100% OS Independent images and may run on: Intel or AMD Compatible (i.e. Transmeta and VIA) Core Duo or newer x86 processor based system including the latest Intel Core i7 and AMD Ryzen Series...
Question: How do I configure a PC with Legacy BIOS to PXE Network boot? Solution: To configure a PC with a Legacy BIOS to PXE Network Boot: 1. Open the BIOS Setup / Configuration 2. Enable the Network Boot ROM or...
Question: How do I configure a PC with UEFI BIOS to PXE Network boot? Solution: To configure a PC with a UEFI BIOS to PXE Network Boot: 1. Open the BIOS Setup / Configuration 2. Enable the Network Stack Boot ROM or...
Question: How do I configure QuickCAST Server to boot the Self Boot UEFI Diagnostic? Solution: To deploy the Self Boot UEFI Diagnostic: 1. Open the QuickCAST configuration by clicking the config button 2. Click the...
Question: Where can I locate the Hardware Diagnostic Test Reports? Solution: Reports are located in three different folders and correspond to the test tool mode used. Reports - UEFI Mode Reports located in this...
Reports are saved as TXT and XML format. To view reports as a professional HTML format, simply open the XML file with any HTML5 capable browser, like firefox, edge or google chrome.
HOW TO: Replace UX Logo with your Company Logo on HTML Test Report To custom brand the test report with a company logo: 1. Navigate to: For Legacy Mode Hardware Diagnostic Test Reports - c:\report_qtsbl For UEFI Mode...
How to Create a Burn-In Script? Solution: To create a script (Legacy Mode): Upon deployment/booting QuickTech Self Boot from QuickCAST, repeatedly tap the ‘E’ key. This will abort the default script from running and...
HOW TO: QuickCAST Server Windows Installation Deployment Windows Installation integration is simple with our pre-configured setup. All that is required on your side is to provide the Windows Installation media.The...
